Live Chat
ADTO News
-
Dealing measures of construction safety risks on scaffolding with couplers
Risks during site construction period. Deformation of the supporting surface.
2015-12-16 -
How to deal with risks caused by the increasing working load during construction
Why does this happen? During the pouring and plastering process, if the accumulating load on the formwork platform is
2015-12-16 -
Key points for the calculation of steel tubular scaffolding with couplers
Ledger: strength and rigidity Connecting scaffolding coupler: anti-skid capacity and load-bearing capacity
2015-12-15 -
Regulations for the erection of flat tubes in the whole scaffolding structure
The transverse flat tubes which are not at the main joints on the working platform shall be better to be set at equal space according to the need of the supporting scaffolding and the maximum
2015-12-15 -
How to reduce the risks of the steel tubular scaffolding with couplers
Take control of the risks and you will reduce the risks to minimum Design risks. Design the load bearing risk.
2015-12-14 -
New codes of the steel tubular scaffolding with couplers
Steel tubular scaffolding with couplers can adopt couplers made of forgeable iron with accordance to national regulation of couplers
2015-12-14 -
Right ways to erect scaffolding working plane.
scaffolding tube manufacturers shall make sense that for the installation of inclined ladder above EL+20700, adopt hoop-type scaffold per Item 2.3.b and fix safety harness with safety rope.
2015-12-11 -
The construction arrangement of steel structure
Inclined ladEL+20700der (install from down to up) below –plane at EL+11200—plane at EL+12900—plane EL+15200—plane at EL+17700 (combined with equipment installation)
2015-12-11 -
The building construction and requirements of the cantilevered scaffolding
All the tubes and braces of steel tubular scaffolding shall use qualified steel couplers and it is forbidden to lead wires or other material for the fixation. Scaffolding braces and tubes material
2015-12-10 -
How to use scaffolding system in accordance with regulations
The construction load value on per 1m2 frame surface of the working platform shall not bigger than regulation: for the construction load from workers on the platform
2015-12-10 -
What is the right way to build the cantilevered scaffolding system
Requirements on erection of supporting braces type cantilevered scaffolding system. There is need on controlling the working load and the erection shall be done in a stable way. For the
2015-12-09 -
Do you know how to build the outside cantilevered scaffolding
Cantilevered outside scaffolding is featured in simple structure and easy operation, which can cut off the usage of scaffolding tubes and working labor, winning most of the projects choice.
2015-12-09 -
How to reduce risks when erecting the steel coupler scaffoldings
The risks for the erection of steel coupler scaffoldings lie in stages of scheme design and site construction and management. Information below is recognizing the construction risks in the
2015-12-08 -
What are the risks in the erection of scaffolding system
Ground foundation parameter risks. The ground foundation parameter, if it is too bigger than the right value or leave out the weather influence when design such as the rain water erode the ground base, or the uplifting of the
2015-12-08 -
How to Erect Scaffolding System when Constructing the High Rise Building?
When constructing the high-rise building, how can we erect the scaffolding system?
2015-12-07