WHOLE SCAFFOLDING & FORMWORK SYSTEM (DESIGN) SERVICE SUPPLIER!

update
> ADTO News > What other advantages can you get from the ringlock scaffolding

Safety Use and Safety Building of the Scaffolding Tube in the Project

Time:2017/09/14

1, scaffold erection or dismantling personnel must be conducted by professional scaffolder. 
2, operation must wear safety helmet, safety belt, wearing non-slip shoes.

 

 

 

 

scaffolding tube

 

 

 

 

3, the fog and rain and snow weather and 6 magnitude winds, may not be the heights of the scaffolding tube operations. 
4, scaffolding tube, homework, line by line according to the requirement of the formation of basic structure unit, step, and gradually build, rectangle around the scaffold should be from one of the angle to the direction extending outside the erection. To ensure stable has take part. 

 

 

5, the erection work, should according to the following requirements for self protection and protect the good operation field personnel safety:
(1) in the rack homework personnel should wear non-slip shoes and wear a seat belt. Guarantee the safety of operation and foot shall have the necessary number of scaffolding tube, and should lay smoothly, and can not have the probe plate. When not laid down pedal, used to locate or grasping, holding bar shall be the stability of the frame part, beginning with the horizontal distance of frame nodes should not more than 0.8 m, vertical distance should be not more than 1.5 m. Is located above the rod joint free stud shall not be used as a control rod. 

 

 

 

scaffolding tube

 

 

 

(2) the shelf operation personnel shall make good division of labor and cooperation, grasp the focus transfer bar, smooth transmission. Don't be too hard, lest cause personal or bar imbalances. For each complete procedure, carefully check to the next process. 
(3) the operation personnel shall wear tool bag and tools after use to pack in the bag, not on the shelf, so as not to fall from. 
 
 

Related News