1, technical parameters, including the various technical parameters of steel tube scaffolding engineering, specific include: the calculated length, spacing of the steel, steel tube pole spacing in the longitudinal and lateral direction, vertical and lateral horizontal pole spacing, sweeping bar spacing, diagonal to the layout of the bracing and data, such as the wall bar set, and so on.

Due to the components of technical parameters are inconsistent, floor type, attached type and cantilever type three kinds, table lists various technical parameters are available, and concise, clear and easy to check. The parameters such as the detailed calculation attached.

2, the technological process: in this paper, the scaffolding construction process:
(1) console scaffold erection process is: the grading, compaction based concrete casting - > Settings - > set-up vertical sweep the floor drains to install steel base, pole - stud - horizontal sweep pole - small rail - main rail (joists) - put the bracing - even the wall bar - scaffolding plank to plunge into protective railings, safety net and in turn connected to design highly.

(2) the ground scaffolding demolition process as follows: the safety net - rail - foot hand piece to bracing, the main rail - small rail - post - from top to bottom in turn pulled down.

(3) cantilever scaffold erection process as follows: set the embedded parts, production, installation of the steel beam to install steel coupling beam, erection of vertical sweeping pole - stud - horizontal sweep pole - small rail - the main rail (joists) - bridging - even put wall rod - scaffolding plank to plunge into protective railings, safety net and in turn connected to design highly.